Spitfire – Oil filter part number?

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #11546
    jdakroyd
    Member

    I can’t spot the part number for the Spitfire oil filter cartridge in the owners manual, can anyone advise please?

    Cheers

    Jon

    Spitfire 134

    #11548
    martin G10
    Member

    Hi, Jon
    this is the filter CCM use for oil changes
    martin

    #11550
    martin G10
    Member

    Hi, Jon
    Ps. Try refilling with 600ml of oil , (that amount isn’t in the manual)
    Martin

    #11568
    breizh33.jmc
    Member

    I confirm for the filter, on the other hand the quantity is 1.8 L no? Does anyone know the part numbers for the brake pads front and back? Many thanks

    #11577
    martin G10
    Member

    Hi, Breizh33
    Has anybody put 1.8ltr of oil in the engine and then checked the level in the sighting glass ?
    regards Martin

    front EBC FA630–
    rear EBC FA174–
    (the last two letters of the part number denotes the brake compound)

    #11578
    breizh33.jmc
    Member

    Hello Martin!
    I’have make the 1st service oil change, and it’s 1.8L (MOTUL 300V), as stated in the CCM manual and the level is perfect.
    Many Thanks for the break pad reference. I appreciate that!

    #13393
    Mark
    Member

    I believe there are 2 filters , does anyone have the details of these please .
    Thanks in advance

    #13396
    martin G10
    Member

    Hi, Mark
    The other filter is a double layer mesh tube that can be cleaned , it’s fitted near the gear shift shaft.
    martin

    #13397
    Mark
    Member

    Thank Martin, that’s very helpful. Just recently had the bike so I am just getting to know it..

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.