Odometer stopped working

[Andy Marsh]

Took my ccm out to day first ride this year, speedometer and odometer not working, everything else fine, anybody got any ideas, or know correct spacing for pick-up sensor and magnet on brake disc?

[martin G10]

Hi, Andy
Is the magnet still in place , ?
PDF from Acewell.
martin

Attachments:

You must be logged in to view attached files.

[Andy Marsh]

Yes it is, the clock was out by a couple of hours too

[martin G10]

Hi, Andy
If it was working when you parked it and it doesn’t work the next time you used it (they don’t keep time very well) , if the lock nuts are tight on the sensor and the mounting bracket is secure the gap won’t have changed , if the magnet is in place , try waving a magnet in front of the sensor and see if the dash shows anything , if it doesn’t there could be wiring problem , corrosion in the three pin connector or the reeds in the sensor have become magnetised , the sensor and bracket are non ferrous.
martin

[Andy Marsh]

Hi Martin
Thanks for the in put now all fixed, I phoned the factory and they talked me through the setting, some how I had changed the circumference and pulse setting, must have done when changing the clock settings, the circumference setting should be C-2200 and pulse P-001
Cheers Andy

[Author]

Posts