Lights not working

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #12212
    lukas
    Member

    First main beam and now dipped and indicators (front and back) not working. Any ideas

    #12221
    martin G10
    Member

    Hi, Lukas
    Start by checking the left hand switch gear (for a voltage) they are all run from the same 9pin connector,inside the fromt of the frame (left side) , headlight halo , tail light , number plate are on a separate supply.
    Wiring colour
    Headlight
    common +pos.green/black pin3
    High Beam. White pin6
    Low Beam. Black. Pin2
    Horn
    +Pos. Green. Pin8
    Grey. Pin5
    Indicators
    common +pos. Blue/black pin7
    Left. light blue pin1
    Right. Red. pin4
    Pin9 is a blank
    regards martin

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.