Ignition cut out

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #13343
    Jimbob
    Member

    Hi all, I’ve had my ccm bobber for the grand total of 1 day and it has an issue.

    Any advice is greatly received as i haven’t even ridden it yet. Im vry handy with soanners and fault finding but this has me stumped.

    Here goes

    If i switch on the ignition with the fob and do not start the engine the ignituon will stay on indefinitely

    If i switch on the ignition and start the bike after a few minutes of idling the whole ignition cutsoutlikeits been turned off, iteull then not reset from anywhere between 5 and 15 minutes, when its ready to be switched again the front and rear lights flash once very brielfy and a relay clicks, it will then recognise the fb and arm the ignition again

    Ive tried leavung the fob ob thr seat it stilldoes it. The battery is fine, thr oil and coolant are fine, the relays all work, the fans kick in at 95 and go off about 86-87

    Tia

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.