Reply To: Head shake

#13256
martin G10
Member

Hi, GjP,Ian,Martin
There are other suspension posts with JM , Andy and myself for Marzocchi forks.
Foggy set his bike up for himself at approx 75kg , then CCM added large preload spacers in the forks and a heavier rear spring to accommodate heavier riders, your forks are probably topping out and the tyre loosing contact with the ground , I thought the forks felt over sprung and under damped (soft springs did bottem out on the brakes, rear was over sprung with 950nm for me at 85kg), JM had his forks sorted with altered spacer and a revalve , I took my Six to Maxton for a full suspension job , both ends of the bike need balanced suspension or one end is forced to do all the work.
regards martin