Reply To: Lights not working

#12221
martin G10
Member

Hi, Lukas
Start by checking the left hand switch gear (for a voltage) they are all run from the same 9pin connector,inside the fromt of the frame (left side) , headlight halo , tail light , number plate are on a separate supply.
Wiring colour
Headlight
common +pos.green/black pin3
High Beam. White pin6
Low Beam. Black. Pin2
Horn
+Pos. Green. Pin8
Grey. Pin5
Indicators
common +pos. Blue/black pin7
Left. light blue pin1
Right. Red. pin4
Pin9 is a blank
regards martin