Reply To: Tank Strap Fitting

martin G10martin G10

I took a look at the instruction pdf , if anybody has ever put one hand under the tank and removed the fuel pipe from the pump please reply to this post ! There is probably a tool that will release the pipe from the pump housing, I’ve managed it by depressing one of the four flange retaining clips and rotating the insert so that the flange climbs over the other three and it pulls out , I think the reference to squeezing the sides to disconnect the pipe refferes to the “Bundy” connector at the throttle body end of the fuel pipe. Also lift the clip to disconnect the 5 pin electrical connector and remember the fuel pipe threads under the frame tube.
regards martin

You must be logged in to view attached files.